Gunwale profile fender trim made from etched, polished and anodised aluminium extrusion. Also available in white UV stabilised PVC polymer for long lasting wear and tear in harsh marine enviroments. Both the aluminium and PVC profile gunwale will look good on any boat.
The aluminium and PVC profile gunwale trim comes in 3.65mtr lengths. The black rubber PVC insert to suit both gunwale profile is JPW9831 which is sold per meter.
Fitting Instructions:
-
With one end approximately 1.8m from the bow, line up the aluminium profile or PVC profile with the gunwale.
-
Drill and secure with self tapping screws or rivets every 225mm to 300mm
-
Pull the profile around the bow fastening as you go.
-
Butt up next length of profile and fasten in the same manner.
-
For tight bends it is advisable to put some wire in the corners of the internal grooves to prevent the profile collapsing and hindering the fitting of the insert.
-
Although our aluminium is of bending quality the larger profiles may need pre-forming or mitring for tight bends.
We recommended using 3M 4200 Marine Adhesive Sealant when installing gunwale.