Bennett Marine Hydraulic Trim Tab Actuators with Wiring 340mm

  • Bennett Marine Hydraulic Trim Tab Actuators with Wiring 340mm

    Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position.

    Fluid flows through a concealed hole in the upper hinge at the top of the actuator — thus eliminating external hoses subject to damage.

    How to identify your existing actuator?

    Measure the overall length of your actuator, from the top to the very bottom of the hinge when the ram is retracted.

    • Standard Actuator = 340mm (13 2/5") overall measurement, from the very top to the bottom of the base hinge. Stroke of 63.5mm (2 1/2") which can be modified to meet unique specifications. Identified with 4 rings on the actuator base.
    • Short Actuator = 290mm (11 3/7") overall measurement, from the very top to the bottom of the base hinge. Stroke of 63.5mm (2 1/2") which can be modified to meet unique specifications. Identified with 3 rings on the actuator base.
    • Extra Short Actuator = 270mm (10 5/8") overall measurement, from the very top to the bottom of the base hinge. Stroke of 63.5mm (2 1/2") which can be modified to meet unique specifications. Identified with 3 rings on the actuator base.

    Link to PDF Diagram Breakdown

    Type Overall Length Retracted Overall Length
    Extended
    Stroke
    Standard Ram 340mm 403.5mm 63.5mm
    Short Ram 290mm 353.5mm 63.5mm
    Ex-Short Ram 270mm 333.5mm 63.5mm

    * Note: It has an option of ram comes with port or starboard wiring

    Bennett Marine Hydraulic Trim Tab Actuator with Wiring 340mm Port
    JPW16157P
    A1101CP
    $365.76 EA (ex. GST)
    Bennett Marine Hydraulic Trim Tab Actuator with Wiring 340mm Starboard
    JPW16157S
    A1101CS
    $365.76 EA (ex. GST)