Supafend Boat Fenders are "one-piece" rotationally molded with non-marking and UV stabilized Marine Grade PVC. They are built tough to last with consistent wall thickness and specially designed extra heavy-duty rope eyelet ends. All fenders are factory tested prior to dispatch to ensure they provide maximum fendering durability and reliability.
Make sure you select the correct Supafend® Boat Fender size and quantity for your vessel. The height of your hull determines the fender size. The general rule is that the fender length should be as close to 3/4 of the exposed hull height.
To prolong the life of your Supafend® Boat Fender, regular washing down with warm soapy water is recommended. Use a sportsball pump (moisten inflation needle) and inflate to 1PSI, do not over-inflate.
Supafend® Boat Fenders should ideally hang at a height level where the wharf edges rub half way the fender length. When mooring next to another boat, re-adjust the fender locations to adequately protect likely areas of contact, taking into consideration the difference of hull contours.