Viper Pro Marine Anchor Winch Wiring Looms

  • Viper Pro Marine Anchor Winch Wiring Looms

    Bell Marine Anchor Winch Wiring Looms are made using marine grade 3 B&S (25mm2) tinned copper wire, blind tinned copper lugs, silicone impregnated marine heat shrink with each connector labelled for ease of installation.

    Every loom includes flexible conduit for ease of installation and your 1.5M switch loom is also included. Simply connect “A” to “A” and ”B” to “B” without the need to refer to your wiring diagram and your winch will come to life.

    Please note that Switch Looms are 1.5M in length and should suit most boat. Viper Winch Motors are fitted with 1 M of 3B&S cable totaling 3.5 M from Solenoid to Winch Motor

    Please note We have tried to accommodate for almost all boats up to 6.0M, however we cannot guarantee that one size fits all.

    WARNING: Install your Viper winch and loom into the boat before you start to fit any other components! You may need to relocate them to suit cable lengths and individual boats.

    Viper Pro Wiring Loom suit Boats to 6m - Micro/1000
    JPW12865
    30034
    $259.00 EA (ex. GST)
    Viper Pro Winch Wiring Loom suit Boats to 8m - Micro/1000
    JPW12866
    30035
    $299.00 EA (ex. GST)
    Viper Pro Winch Wiring Loom suit Boats to 9m - 1500
    JPW12867
    30060
    $399.00 EA (ex. GST)