Anchor & Mooring

UV stabilised PVC 40mm white with back strip gunwale fendering sold in pre-cut common lengths ranging from 8mtrs to 22mtr. Longer lengths available on request.

A compact, on-deck mounted windlass providing functionality and efficiency. Manufactured for the harsh marine environment, the Genius 250 features a robust anodised marine grade alloy housing and chrome plated bronze gypsy.
Recommended Boat Size: 6 - 9mtr (20-30ft)

Rocna stainless steel anchors are a multipurpose anchor to suit all ocean floor environments. Features include: instant set; self-launching; wind & tide shift resistant.
Stainless Steel | 4kg - 55kg+ | Boat Length 4m - 26m | < 60 Tonnes 

  » View More

Polyethylene staple silver rope is UV stabilised strong and flexible, coil rope suitable for general marine and fishing industry use. Resistant to grease, oil and water.

These deluxe anchor swivels are normally attached between your chain and anchor reducing the chance of your rope and chain getting twisted and your anchor spinning on the way up and damaging your hull.

The Viper Pro Series II boasts a 1000w electric motor and has a fall rate of 45 meters per minute and retrieval rate of over 41 meters per minute, ensuring you get onto your GPS mark, first time, every time!

The Viper Pro Series II 1500 anchor winch is the most powerful in the Bell Marine range, designed for larger vessel installations of 8 meters and over and powerful enough to haul up a 37lb plus anchor all day. » View More

The Viper gravity-fed S-Series Anchor Winch was developed by Bell Marine after three years of research and two years of field testing.

The Viper S-series Micro Winch features an all-stainless steel construction including a 316-grade stainless steel gearbox. Designed to fit into bow riders, tinnies, walk-around’s, bass boats and any boat with restricted anchor well space or even none at all. » View More

The Viper S Series Anchor Winch features an all-stainless steel construction and 1000w electric motor with a fall rate of 45 meters per minute and retrieval rate of over 41 meters per minute to ensure you get onto your GPS mark, first time, every time!

The fixed head “Power” anchor is a high holding power anchor constructed of high-grade stainless steel for maximum strength.

DIN766 chain uses a low carbon steel chain specifically designed for anchoring applications. Hot dip galvanised short link chain, calibrated to latest DIN766 standard. Each link is calibrated to ensure proper fit for most metric windlasses. Check manufacture's specifications prior to purchase. Chain is sold in cut lengths per metre to requirements.

Rocna galvanised anchors are a multipurpose anchor to suit all ocean floor environments. The ultimate in high holding anchors.
Galvanised | 4kg - 55kg+ | Boat Length 4m - 26m | < 60 Tonnes 

European styled heavy duty inflatable fenders available in a large range of sizes to suit everything from small runabouts to large yachts and cruisers.

The BUMP! ‘D’ fender has been developed to provide a quick and simple installation with hidden fixings without compromising impact resistance.

The BUMP! ‘D’ fender has been developed to provide a quick and simple installation with hidden fixings without compromising impact resistance.

Nylon rope medium lay 3 strand with green trace for general marine use.

Nylon rope medium lay 3 strand with green trace for general marine use.

The DP2 500 Prince Series is a lightweight yet strong vertical anchor winch with a 316 grade stainless steel base, gypsy and chain inspection lid, aluminum lower gearbox structure and motor housing.
Recommended Boat Size: 5 to 9 metres (16 - 30ft)

The DP2E Prince Series anchor windlass is equipped with an epicyclical gearbox, that provides much higher efficiency (40% compared to equivalent traditional gearboxes).
Recommended Boat Size: 6 - 10mtr (16-36ft)

Quick BTQ 250DP 12/24v 6.5/8/10kW, tunnel diameter: 250mm (9.85") bow thruster with double propeller.
Recommended boat length from 13-21 m (42-69 ft)

The Sidewind Marine R-Series fenders are constructed using molded vertical ribs to enhance strength and minimise rolling. » View More

This Australian-made HI SPEC 3000 rope and chain kit is manufactured from the most sturdy materials, and offers a significant break strain rating.