I agree to the above terms and conditions
Please view products below or select from one of the following categories...
High quality UV stabilised nylon insert for rod holders. Ideal for rocket launcher racks etc. Finishes the aluminium or stainless steel tube neatly and saves the rod from damage.
Metric 50mm OD (Aqua blue)
Nylon inserts for rod holders. High quality UV stabilised plastic. Ideal for rocket launcher racks etc. Finishes aluminium or stainless steel tube neatly and saves the rod from damage.
Imperial 2" | suits 2" (50.8mm) O.D.
Large oval shaped head rod holders made with robust UV stabilised polypropylene. The 30º angled shaft has a moulded rod gimbal in the shaft base.
Oval | Angled | polypropylene | L240mm | Shaft: 43mm ø
Cast stainless steel flush mount oval shaped head Rod Holder. White PVC sealing cap and rod insert with PVC mounting gasket with S/S gimbal.
Angled | S/Steel | Cap | L: 210mm | Shaft: 38mm ø
Straight shaft, flush mount rod holders with beveled edged head. Made from UV stabilised polypropylene. Available in 2 colours.
Straight | Flush | Polypropylene | L: 225mm | Shaft ID: 43mm ø
Robust side mount rod holder made from UV stabilised polypropylene with moulded rod gimbal in base. Integral mounting bracket allows it to be mounted vertically or at any desired angle.
Side | Polypropylene | L: 235mm | Shaft ID 42mm ø
Narrow head, flush mount angled rod holder with beveled head edges and gimbal in shaft. Made from UV stabilised polypropylene.
Angled | Narrow | Flush | Polypropylene | L = 225mm | Shaft = 40mm ø
Able to hold up to four rods, this bracket can be attached anywhere on a boat with a few simple screws. Made from marine-grade stainless steel, this rod-holding bracket is durable in all conditions.
Made from marine-grade 316 stainless steel, these fishing racks are available in three-holder and four-holder models. Strong and durable, these racks can attach anywhere on a boat with only a few screws.
Stainless Steel(316g) gimbal lock rod holder extension. Used to extend (450mm) & angle rod over side or stern. Locks into standard stainless steel rod holders.
Extension (450mm) | S/Steel
Weld-on rod holder constructed from marine-grade aluminium with anodised finish. Internal tube is fitted with a white PVC insert and weld-in rod gimbal pin.
Port and Starboard pair of stainless steel (316) rod holders. Angle and Inclined to suit both sides of a boat giving rod clearance.
Angled & Inclined | S/Steel | Oval | L: 195mm | Shaft: 40mm ø
Stainless steel angled rod holder with slimline 60mm diameter flush mounting head. Stainless rod gimbal pin through 30º angle shaft.
Angled | Narrow Head | S/Steel 316 | L: 215mm | Shaft: 45mm ø
White PVC Rod Holder Insert replacement with cover top cap. Suits any rod holders with an inside tube size of 47-48mm.
Stainless steel (304) rod holder with gimble pin fitted at base of shaft.
S/Steel (304) | L: 190mm | Shaft I.D. : 41mm ø
The Attwood Big Game Rod Holder features a polished 316 grade stainless steel tube for corrosion resistance and UV-resistant polymer liner to protect the finish on your rod or reel.
The Attwood Big Game Cap and Gasket suit Big Game Rod Holder provides a water seal around the flange and closes the tube when not in use.
Cast aluminium rod holders with 30 degree angled head, available in either a weld-on model or with 6mm countersunk holes.
» View More
Rod Holder Insert for aluminium or stainless steel rod holders. Ideal for rocket launcher racks etc to protect rod from damage. 2 options available to suit metric & imperial sized rod holders.
Imperial 2" O.D. (Black) | Metric 50mm O.D. (Dark Grey)
Highly polished marine grade aluminium rod holder design for weld on (build your own rod racks). Comes supplied with a white PVC liner insert for rod protection.
Flush mount heavy duty rod holders have a complete welded head to shaft collar for maximum strength, built to handle all conditions.
Angled rod holders made from UV stabilised polypropylene plastic. Flush mount with 30º angled shaft & moulded rod gimbal in base. Available in black or white.
Oval shaped head angled plastic rod holders. Robust UV stabilised polypropylene with a 30º shaft and moulded rod gimbal in base. Available in black and white.
Angled | Oval | Polypropylene | L: 210mm | Shaft: 44mm ø
Side mount UV stabilised polypropylene plastic rod holder. Streamline design with 6 mounting screw holes. Can be mounted at any desired angle. Available in black or white.
Browse products and add to your enquiry cart.