Tank Accessories

Moeller fuel line assemblies keep your fuel operating at peak performance to ensure your outboard motor runs smoothly.

A combination of a fuel tank cap and gauge with a breather vent to suit a 12L Scepter Marine tank.

These AS2906 approved plastic jerry cans feature a vented cap on the rear for extra flow rate when pouring. Available in 5L and 10L sizes.

These tank & fuel line connectors are manufactured to suit Suzuki branded engines.

This female fuel line connector is manufactured to suit Suzuki branded engines over 75HP.

OMC fuel line assembly made from reinforced 8mm 5/16" fuel hose with primer bulb and standard OMC "Johnson Evinrude" tank to engine fuel fittings. Bag packed.

NTP threaded cast brass tails. 1/8" to 5/16" tail.

12V Water Level Gauge featuring a black dial, black plastic bezel and a dropping resistor for 24V applications.

Wema waste holding tank senders rated at 240 Ohm (empty) - 30 Ohm (full). Made from stainless steel and available in a different lengths. Tank senders have a 1 1/4" BSP thread to secure into tank.

Waste level gauge with black or white dial and plastic bezel. Comes as standard 12v with dropping resistor included for 24v applications.
 

Fuel level gauge with black dial and plastic bezel. Comes as standard 12v with dropping resistor included for 24v applications.

The S5 sender from Wema is an innovative solution for monitoring the level of fuel and/or water tanks in boats, trucks, coaches, caravans and recreational vehicles. Mounts via a 5 hole pattern flange which can be simply fitted into the top of a matching tank. Rated 240-30 Ohm.

The S3 sender is an innovative solution for monitoring the level of fuel and/or water tanks in boats, trucks, coaches, caravans and recreational vehicles. Mounts via a 1 1/4" BSP pipe fitting and can be simply screwed into the top of a matching tank. Rated 0-190 Ohms

The S5 sender from Wema is an innovative solution for monitoring the level of fuel and/or water tanks in boats, trucks, coaches, caravans and recreational vehicles. Mounts via a 5 hole pattern flange and can be simply fitted into the top of a matching tank. Rated 0-190 Ohms.

The S3 sender is an innovative solution for monitoring the level of fuel and/or water tanks in boats, trucks, coaches, caravans and recreational vehicles. Mounts via a 1 1/4" BSP pipe fitting and can be simply screwed into the top of a matching tank.

Marine Fuel Filler Hose is constructed with a high-grade chemigum tube for superior fuel resistance for type A1 fuel fill applications.

Marine Fuel Filler Hose is constructed with a high-grade chemigum tube for superior fuel resistance for type A1 fuel fill applications.

This female tank and fuel line connector is manufactured to suit Honda branded engines made from 1991 onwards.

Replacement (spare) parts for Stainless Steel Fuel Tanks.

Fuel pick-up elbow assembly for use with 11.4L (3 Gallon) and 22.7L (6 Gallon) Neptune Tanks from Scepter Marine.

Fuel pick-up elbow assembly for use with the 12L Neptune Tank from Scepter Marine.

Fuel pick-up and gauge assembly to suit 45 low profile and high profile tanks.

This male tank and fuel line connector is manufactured to suit Suzuki branded engines rated more than 75HP.

This male tank fitting is manufactured to suit Suzuki branded engines rated less than 75HP.