I agree to the above terms and conditions
Please view products below or select from one of the following categories...
Able to hold up to four rods, this bracket can be attached anywhere on a boat with a few simple screws. Made from marine-grade stainless steel, this rod-holding bracket is durable in all conditions.
Bell Marine's fibreglass bait boards feature a gelcoat top and bottom and are easily removable for when you're cruising with the family!
Bait board reef runner with twin leg and twin rod holders. Adjustable leg position and adjustable angle for correct positioning. Made and designed in Australia. Available in 3 sizes.
Small (665mm) | Medium (815mm) | Large (1020mm)
Clamp-on rail mount adjustable rod holder is made with a marine grade anodised aluminium to suit rails 22mm and up.
» View More
Super-strong UV-stabilised nylon rod holder with a narrow oval shaped head and 30º angled shaft.
Side mount rod holder made with marine grade anodised aluminium. Internal tube is fitted with a white PVC insert and weld-in rod gimble pin.
Weld-on rod holder constructed from marine-grade aluminium with anodised finish. Internal tube is fitted with a white PVC insert and weld-in rod gimbal pin.
These stainless steel transducer covers from Bell Marine will eliminate the spray and splash-back from your boat's transducer, and reduce any water noise that might affect the picture on your sounder.
Brushed aluminum rod holder design for weld on (build your own rod racks). Comes supplied with a white PVC liner insert for rod protection.
High quality UV stabilised nylon insert for rod holders. Ideal for rocket launcher racks etc. Finishes the aluminium or stainless steel tube neatly and saves the rod from damage.
Metric 50mm OD (Aqua blue)
Nylon inserts for rod holders. High quality UV stabilised plastic. Ideal for rocket launcher racks etc. Finishes aluminium or stainless steel tube neatly and saves the rod from damage.
Imperial 2" | suits 2" (50.8mm) O.D.
Polished stainless steel (304) angled rod holder. Flush mounting oval head with PVC shaft insert & rubber gasket. S/steel gimbal through shaft.
Angled | S/Steel | Oval | L: 210mm | Shaft 40mm ø
Polished stainless steel (304) angled rod holder. Flush mounting oval head with PVC insert, PVC cap & rubber gasket. S/steel gimbal through shaft.
Angled | S/Steel | Oval | L: 210mm | Shaft 38mm ø
» View More
Large oval shaped head rod holders made with robust UV stabilised polypropylene. The 30º angled shaft has a moulded rod gimbal in the shaft base.
Oval | Angled | polypropylene | L240mm | Shaft: 43mm ø
Polished stainless steel side mount rod holder with S/Steel mounting brackets and rod gimbal in base. Can be mounted at any desired angle. Rubber insert saves rod from wear.
Side Mount | S/Steel | L: 257mm | Shaft: 40mm ø
3 rod vertical storage rack. Includes tube slots to support the reel. Includes slots on the bracket for knife and tool storage. UV inhibited white plastic.
3 rod rack | White | Plastic | Vertical Mount
Highly polished stainless steel rod holder design for weld on (build your own rod racks). Comes supplied with a white PVC liner insert for rod protection.
Heavy duty, stainless steel, angled oval head flush mount rod holder. Black PVC moulded sealing cap and full length rubber liner insert. Rod gimbal pin through shaft.
Angled | S/Steel | Oval | Cap | L: 210mm | Shaft: 40mm ø
Cast stainless steel flush mount oval shaped head Rod Holder. White PVC sealing cap and rod insert with PVC mounting gasket with S/S gimbal.
Angled | S/Steel | Cap | L: 210mm | Shaft: 38mm ø
Ratchet rod holder made from ABS plastic. Open tube & fully adjustable on vertical/horizontal plane for easy rod removal. Locking side mount socket with alterntive mounting options.
Ratchet | ABS Plastic | Optional Rail & Flush Mount fittings
High quality 316 grade stainless steel Round Bait Station for ski pole or rail mounting. Includes two angled S/S rod holders.
Extra heavy duty Bait station ideal for larger boats and cruisers. Includes 6 x rod holders and 1 x drink holder welded to the frame.
Size: L: 1020mm (830mm) | W: 450mm (310mm)
Browse products and add to your enquiry cart.