I agree to the above terms and conditions
Please view products below or select from one of the following categories...
» View More
Clamp-on rail mount adjustable rod holder is made with a marine grade anodised aluminium to suit rails 22 - 25mm.
» View More
Able to hold up to four rods, this bracket can be attached anywhere on a boat with a few simple screws. Made from marine-grade stainless steel, this rod-holding bracket is durable in all conditions.
Super-strong UV-stabilised nylon rod holder with a narrow oval shaped head and 30º angled shaft.
Side mount rod holder made with marine grade anodised aluminium. Internal tube is fitted with a white PVC insert and weld-in rod gimble pin.
Weld-on rod holder constructed from marine-grade aluminium with anodised finish. Internal tube is fitted with a white PVC insert and weld-in rod gimbal pin.
High quality UV stabilised nylon insert for rod holders. Ideal for rocket launcher racks etc. Finishes the aluminium or stainless steel tube neatly and saves the rod from damage.
Metric 50mm OD (Aqua blue)
Nylon inserts for rod holders. High quality UV stabilised plastic. Ideal for rocket launcher racks etc. Finishes aluminium or stainless steel tube neatly and saves the rod from damage.
Imperial 2" | suits 2" (50.8mm) O.D.
Polished stainless steel (304) angled rod holder. Flush mounting oval head with PVC shaft insert & rubber gasket. S/steel gimbal through shaft.
Angled | S/Steel | Oval | L: 210mm | Shaft 40mm ø
Polished stainless steel (304) angled rod holder. Flush mounting oval head with PVC insert, PVC cap & rubber gasket. S/steel gimbal through shaft.
Angled | S/Steel | Oval | L: 210mm | Shaft 38mm ø
Large oval shaped head rod holders made with robust UV stabilised polypropylene. The 30º angled shaft has a moulded rod gimbal in the shaft base.
Oval | Angled | polypropylene | L240mm | Shaft: 43mm ø
Polished stainless steel side mount rod holder with S/Steel mounting brackets and rod gimbal in base. Can be mounted at any desired angle. Rubber insert saves rod from wear.
Side Mount | S/Steel | L: 257mm | Shaft: 40mm ø
3 rod vertical storage rack. Includes tube slots to support the reel. Includes slots on the bracket for knife and tool storage. UV inhibited white plastic.
3 rod rack | White | Plastic | Vertical Mount
Highly polished stainless steel rod holder design for weld on (build your own rod racks). Comes supplied with a white PVC liner insert for rod protection.
Heavy duty, stainless steel, angled oval head flush mount rod holder. Black PVC moulded sealing cap and full length rubber liner insert. Rod gimbal pin through shaft.
Angled | S/Steel | Oval | Cap | L: 210mm | Shaft: 40mm ø
Cast stainless steel flush mount oval shaped head Rod Holder. White PVC sealing cap and rod insert with PVC mounting gasket with S/S gimbal.
Angled | S/Steel | Cap | L: 210mm | Shaft: 38mm ø
Ratchet rod holder made from ABS plastic. Open tube & fully adjustable on vertical/horizontal plane for easy rod removal. Locking side mount socket with alterntive mounting options.
Ratchet | ABS Plastic | Optional Rail & Flush Mount fittings
Stainless steel (316g) rod holder with slimline 60mm head. Stainless rod gimbal pin through shaft.
Vertical | Narrow | S/Steel | L: 215mm | Shaft: 40mm
Stainless steel angled rod holder with slimline 60mm diameter flush mounting head. Stainless rod gimbal pin through 30º angle shaft.
Angled | Narrow Head | S/Steel 316 | L: 215mm | Shaft: 45mm ø
Straight shaft, flush mount rod holders with beveled edged head. Made from UV stabilised polypropylene. Available in 2 colours.
Straight | Flush | Polypropylene | L: 225mm | Shaft ID: 43mm ø
Robust side mount rod holder made from UV stabilised polypropylene with moulded rod gimbal in base. Integral mounting bracket allows it to be mounted vertically or at any desired angle.
Side | Polypropylene | L: 235mm | Shaft ID 42mm ø
Narrow head, flush mount angled rod holder with beveled head edges and gimbal in shaft. Made from UV stabilised polypropylene.
Angled | Narrow | Flush | Polypropylene | L = 225mm | Shaft = 40mm ø
Heavy duty game pole holder, mirror polished stainless steel construction. Can be removed from mounting bracket.
High quality, heavy duty rod holder cast stainless steel base with twin ratchet adjustment for up / down and 360 degree swivel options. 45mm ID tube with soft rubber insert and gimbal.
Adjustable | Cast S/Steel | shaft: 45mm ø
Browse products and add to your enquiry cart.