Trailer Parts

Launching and retrieving your boat has never been easier and less stressful with the Ark Large Boat Winch, rated up to 1150kg and featuring a unique magnetic snap-on handle.

Non marking, wide profile, ribbed polyurethane Wobble rollers to minimise skidding.
Wobble | Red | L: 110mm | W: 72mm | 24.5mm Hole

Non marking, wide profile, ribbed polyurethane wobble rollers. Designed to to minimise skidding. Available in two colours.
Wobble | Red/Blue | Dia: 110mm | W: 73mm | 26mm Hole

Non marking, wide profile polyurethane wobble rollers. Ribbed to minimise skidding. Available in three different colours.
Red/Blue/Grey | Dia: 110mm | W: 72mm | 26mm Hole

Heavy duty polyurethane wobble roller, non marking, wide profile for grip to hull and ribbed to minimise skidding.
Wobble | Red | L: 125mm | W: 73mm | 22mm Bore

Inflatable boat rollers for moving boats across beaches Etc. At least two rollers should be used, depending on the type, length and weight of the boat. Suitable for a range of craft from small dinghies to surf boats Etc.

Inflatable boat rollers for moving boats across beaches Etc. At least two rollers should be used, depending on the type, length and weight of the boat. Suitable for a range of craft from small dinghies to surf boats Etc.

Trailer strip made from hard wearing, non-marking high density polyethylene. Suitable for use on aluminium boats only. 
Trailer Strip | Blue, Red | 50mm(w) x 15mm(h) | 1.5 & 3m Lengths

Trailer strip made from hard wearing, non-marking magnalene. Suitable for use on aluminium boats only. 
Trailer Strip | Red or Blue | 57mm(w) x 16mm(h) x 3m Lengths

The 915 includes a 10' remote control cord with switch and features a pulley block for double-line applications, emergency hand crank and 60 amp standard wiring harness.

Soft compound, hard wearing, non-marking, red polyurethane rollers suitable for fibreglass boats.
Dimensions: L = 100mm | Diameter = 61mm | Bore = 17mm

316-grade stainless steel trailer hair pins (R-pins) available in three sizes. Only available in a bag of ten.

Trailer jockey wheel with clamp on bracket and 6-inch solid rubber wheel.

Replacement control receiver for Powerwinch model RC23 and RC30.
Mfr # R001500

The RC30 is designed for large trailer boats length 7m to 9 meter L.O.A and max boat weight 5200kg. The RC30 model runs on 12 volts and has the added convenience of a light wireless remote control.

The RC23 is designed for large trailer boats length 5m to 7 meter L.O.A and max boat weight 3400kg. The RC23 runs on 12 volts and has the added convenience of a light wireless remote control.

High quality stainless steel winches designed for the marine environment. Solid gear design, internally lubricated drum and pinion gear bushings. Available in single or dual gear drive.
Winch cable not included.
S/Steel (304) | Single & Dual Drive | 360kg | 545kg | 725kg | 900kg

Jockey wheel trailer 'U' bolts galvanised Kits. Includes nuts. 
Galv. U Bolts | 50mm | 75mm | 100mm | Pairs

Dyneema Winch Rope is available in three sizes to handle loads of up to 3500kg. Includes stainless steel 'S' hook or forged steel snap hook.

Quality Australian Made polyester webbing strap connected to a stainless steel ‘S’ hook. Easy to use as the webbing reels onto the drum evenly.
Webbing (50mm) | 350kg | 'S' or Snap Hook | L: 4.3m, 6m, 7m, 7.5m 

Quality Australian made polyester webbing connected to a 'Forged Snap Hook’.  Easy to use as the webbing reels onto the drum evenly. 
Webbing (50mm) | 550kg & 1,000kg | Snap Hook | L: 6, 7 & 7.5m

These trailer winch ropes are made from a spectra high strength, low stretch fibre. Rope performs up to 15 times higher strength than wire rope.

Galvanised steel cable complete with a stainless steel 'S' Hook to suit manual trailer winches. Choose from a range a lengths.

Polyester Webbing (50mm) | Zinc Plated Snap Hook | 4.3, 6 & 7m