I agree to the above terms and conditions
Please view products below or select from one of the following categories...
» View More
Non marking, wide profile, ribbed polyurethane Wobble rollers to minimise skidding.
Hot dipped galvanised trailer roller brackets. 4 sizes available in 16mm pin (100, 113, 150, 200mm) & 1 in 20mm pin 200mm.
Hot dipped galvanised trailer roller pins to suit different roller sizes.
Trailer strip made from hard wearing, non-marking high density polyethylene.
Trailer Strip | Blue, Red | 70mm(w) x 40mm(h) x 3m Lengths
End cap to suit the Ezi Guide Boat Alignment System.
Red & Blue roller end caps made from magnalene.
End Cap | HDPE | L: 28mm | Dia: 70mm | 13mm Bore
Hard wearing blue and red Keel polypropylene trailer rollers.
Made from hard wearing red polyurethane. They outlast, are less abrasive & reduce hull marking. Suitable for fibreglass boats.
Keel | Polyurethane | Red | L:75mm, 150mm, 178mm
Non marking, wide profile polyurethane wobble rollers. Ribbed to minimise skidding. Available in three different colours.
Red/Blue/Grey | Dia: 110mm | W: 72mm | 26mm Hole
High-density polyethylene grooved plastic skids are ideal for boat trailers providing a non skid surface for launching and retreiving boats on trailers.
Trailer strip made from hard wearing, non-marking high density polyethylene. Suitable for use on aluminium boats only.
Trailer Strip | Blue, Red | 50mm(w) x 15mm(h) | 1.5 & 3m Lengths
Trailer strip made from hard wearing, non-marking magnalene. Suitable for use on aluminium boats only.
Trailer Strip | Red or Blue | 57mm(w) x 16mm(h) x 3m Lengths
Main roller to suit Ezi Guide Boat Alignment System.
Ark's EziGuide Self-Aligning Boat Loader simplifies launching and loading your boat by guiding it safely to the centre of your trailer.
» View More
Heavy duty polyurethane wobble roller, non marking, wide profile for grip to hull and ribbed to minimise skidding.
Wobble | Red | L: 125mm | W: 73mm | 20mm central hole
Natural black rubber Round/Flat Transom Cap roller. Economically priced, non-marking.
Transom Roller | L: 60mm | Dia: 75mm | 17mm Bore
Hard wearing Sydney Magnalene (HDPE) non-marking rollers, suitable for use on aluminum boats only. Available in 6 variations.
Sydney | HDPE | Blue, Red | Dia: 70mm
Non marking, wide profile, ribbed polyurethane wobble rollers. Designed to to minimise skidding. Available in two colours.
Wobble | Red/Blue | Dia: 110mm | W: 73mm | 26mm Hole
Soft compound, hard wearing, non-marking, red polyurethane rollers suitable for fibreglass boats.
Dimensions: L = 100mm | Diameter = 61mm | Bore = 17mm
316-grade stainless steel trailer hair pins (R-pins) available in three sizes. Only available in a bag of ten.
Rust proof washers and split pins to suit 16-18mm spindle on a boat trailer roller. Includes six stainless steel washers and six stainless steel split pins.
» View More
Browse products and add to your enquiry cart.