Replacement gasket seal to suit the range of Bomar High Profile 2000 Series Deck Hatches.
Bomar MPN: P2000-26
- Black rubber gasket
- Sold per foot
Instructions on Replacing Bomar Hatch Gasket with Lip:
- Pull out the old gasket
- Starting near a hinge, gently push the lip of the gasket into the space between the lens and extrusion.
- Carefull cut the gasket to length forming a butt joint
- Pull out two inches of the gasket either side of the joint and super glue together. Be very careful not to get superglue on the lens. Leave for about 5 minutes to allow the adhesive to completely set.
- Push gasket back into the cavity and apply a drop of glue in the four corners to secure the gasket in place.
More From This Category
Bomar Hatch Handle Contoured Locking for Low Profile Extruded Hatches P-JPW170916 P2000-18-L-IO
From $106.64 (inc. GST)