Replacement gasket seal to suit Bomar Low Profile A & P series NIBO Extruded Deck Hatches with 6mm lens thickness - made after 1999.
Bomar MPN: P2000-09
Suits Bomar Hatch Part Numbers:
- Black rubber gasket
- Sold per foot
Instructions on Replacing Bomar Hatch Gasket with Lip:
- Pull out the old gasket
- Starting near a hinge, gently push the lip of the gasket into the space between the lens and extrusion.
- Carefull cut the gasket to length forming a butt joint
- Pull out two inches of the gasket either side of the joint and super glue together. Be very careful not to get superglue on the lens. Leave for about 5 minutes to allow the adhesive to completely set.
- Push gasket back into the cavity and apply a drop of glue in the four corners to secure the gasket in place.
More From This Category
Bomar Latch Toggle for Classic Series Portlight S616 JPW171518 P100-05
$25.96 (inc. GST)
Bomar Screen And Gasket Kit for Classic Series Portlight S616 JPW171516 P100-04-RETRO
$103.95 (inc. GST)
From $43.26 (inc. GST)