Gunwale - Profile Aluminium 50mm

  • Gunwale - Profile Aluminium 50mm JPW9823 ASE0604PA02

    Gunwale boat fender trim made from a 50mm extruded anodised aluminium.

    **The aluminium gunwale trim is supplied as cut set sizes of 3.65mtr lengths**

    **Please Note: PVC rubber insert shown in image is sold per metre separately.**
    The black PVC insert to suit is sold per meter and is a related product.

    Install Instructions:

    1. With one end approximately 1.8m from the bow, line up the aluminium profile or PVC profile with the gunwale.
    2. Drill and secure with self tapping screws or rivets every 225mm to 300mm
    3. Pull the profile around the bow fastening as you go.
    4. Butt up next length of profile and fasten in the same manner.
    5. For tight bends it is advisable to put some wire in the corners of the internal grooves to prevent the profile collapsing and hindering the fitting of the insert.
    6. Although our aluminium is of bending quality the larger profiles may need pre-forming or mitering for tight bends.
    Gunwale Material Type Width (mm) Length (m) A (mm) B (mm)
    Aluminium 50 3.65 50 25
    • Oversize Product
    $174.90 EA (ex. GST)