The Ultra-Max set consists of a Par-Max 3.5 40PSI diaphragm pressure pump, pre-filter and 1 litre pressurized bladder accumulator tank on a sturdy plastic mounting board with rubber feet.
This system is fully assembled, wired and plumbed ready for use to simplify installation for both the professional and amateur installer.
Simple one-step electrical connection and snap-in ports for connection to 12mm (1/2") I.D hose.
Par-Max 3.5 automatic fresh water pressure pump provides up to 13.2 litres per minute flow which will adequately serve 3 x 12mm (1/2") outlets in standard installations.
- Fully mounted pump system provides up to 13.2 litres per minute flow
- Diaphragm pump gives smooth and quiet operation and dry run ability
- Includes solid plastic mounting board (322 x 328mm), accumulator tank, filter, plug-in hose ports, wiring connection studs all pre-fitted
- Self primes to 3 metres
- Can be installed vertically or horizontally
- Ignition protected motor
- Thermal overload protection with auto re-start
- Pressure switch cuts in at 20PSI - cuts out at 40PSI
More From This Category
From $447.00 (inc. GST)