Septone Fibreglass Matting used in conjunction with Fibreglass Polyester Resin and MEKP Catalyst will repair cracks and holes in fibreglass, wood, steel, iron, masonry and other inflexible material.
Directions: In warm conditions, 20 drops of catalyst will be required to gel 50ml of resin. In cool conditions, 40 drops of catalyst will be required to gel 50ml of resin. Adjust these quantitites as required, depending on the size of the job. Mix the catalyst into the resin thoroughly. The setting time is approximately 20 minutes, depending on the temperature and catalyst level.
Warning: Corrosive. Attacks eyes - protect eyes when using. Wear eye protection when mixing or using. Avoid contact with skin. Wash hands after use.
(mm) (L x W)
|Black||175 x 120|
|White||175 x 120|