Bennett

Navigation

www.bennetttrimtabs.com

In 1960, Charles Bennett invented the first adjustable trim tab system. Since then, they've continued to push forward and have introduced a myriad of industry-changing innovations, like auto tab control, trim tab position indication, and NMEA2000 integration.

Bennett Marine continues to lead the way as one of the largest manufacturers of durable hydraulic and electric trim tab systems for a variety of boat styles and sizes. Properly-sized trim tabs improve the performance of your boat by adjusting the running angle of your vessel. Bennett trim tabs help you get on plane faster, correct listing to one side, improve visibility & increase your fuel efficiency.

We stock a range of Bennett trim tab products and accessories to suit every kind of vessel.

Showing 1 - 48 of 92

Bennett Marine Auto Tab Retractor

From $305.62 (inc. GST)

Bennett Marine Auto Tab Retractor

Bennett Marine AutoTrim Pro Control for BOLT Electric Trim Tab Systems

$1,770.33 (inc. GST)

Bennett Marine AutoTrim Pro Control for BOLT Electric Trim Tab Systems JPW16059 AP000A1BC

Bennett Marine AutoTrim Pro Control for Hydraulic Trim Tab Systems

$1,770.33 (inc. GST)

Bennett Marine AutoTrim Pro Control for Hydraulic Trim Tab Systems JPW16058 AP000A1HA

Bennett Marine AutoTrim Pro Sensor Kit for Extra Short Hydraulic Actuators

$283.82 (inc. GST)

Bennett Marine AutoTrim Pro Sensor Kit for Extra Short Hydraulic Actuators JPW16061 ATPSEN1.225SD

Bennett Marine AutoTrim Pro Sensor Kit for Standard and Short Hydraulic Actuators

$283.82 (inc. GST)

Bennett Marine AutoTrim Pro Sensor Kit for Standard and Short Hydraulic Actuators JPW16060 ATPSENSTD

Bennett Marine BOLT Actuator Wiring Harness

From $94.58 (inc. GST)

Bennett Marine BOLT Actuator Wiring Harness

Bennett Marine BOLT Electric Trim Tab Kit without Plane Assembly

$1,180.59 (inc. GST)

Bennett Marine BOLT Electric Trim Tab Kit without Plane Assembly JPW16331 BOLTBLT

Bennett Marine Deutsch Connector 2way Male

$27.09 (inc. GST)

Bennett Marine Deutsch Connector 2way Male JPW16344

Bennett Marine EIC Sender Pigtail for Hydraulic Trim Tab System

$21.30 (inc. GST)

Bennett Marine EIC Sender Pigtail for Hydraulic Trim Tab System JPW16248U PT950

Bennett Marine EIC Wiring Extension Cable 8m (25ft)

$37.45 (inc. GST)

Bennett Marine EIC Wiring Extension Cable 8m (25ft) JPW16295

Bennett Marine Hardware for Sport Hydraulic Trim Tabs (M80 & M120)

$66.52 (inc. GST)

Bennett Marine Hardware for Sport Hydraulic Trim Tabs (M80 & M120) JPW16199 H1170C

Bennett Marine Hydraulic Trim Tab Kit with Rocker Control (No Planes)

$1,120.01 (inc. GST)

Bennett Marine Hydraulic Trim Tab Kit with Rocker Control (No Planes) JPW16210

Bennett Marine Hydraulic Trim Tab Standard Actuator with External Line 340mm

$397.01 (inc. GST)

Bennett Marine Hydraulic Trim Tab Standard Actuator with External Line 340mm JPW16158 A1101EX

Bennett Marine Integrated Helm Control for BOLT Electric Trim Tab Systems

$1,002.85 (inc. GST)

Bennett Marine Integrated Helm Control for BOLT Electric Trim Tab Systems JPW16323 OBI9000E

Bennett Marine Integrated Helm Control for Hydraulic Trim Tab Systems

$891.40 (inc. GST)

Bennett Marine Integrated Helm Control for Hydraulic Trim Tab Systems JPW16324 OBI9000H

NEW

Bennett Marine Joystick Control for BOLT Electric Trim Tab Systems

$461.91 (inc. GST)

Bennett Marine Joystick Control for BOLT Electric Trim Tab Systems JPW16325 JOY1000

Bennett Marine Pigtail Sensor Wire PT960 with Deutsch Plug

$39.90 (inc. GST)

Bennett Marine Pigtail Sensor Wire PT960 with Deutsch Plug JPW16246 PT960

Bennett Marine Replacement Full Threaded Screw 1-1/2″ (Trim Tab to Transom Fastener)

$3.96 (inc. GST)

Bennett Marine Replacement Full Threaded Screw 1-1/2″ (Trim Tab to Transom Fastener) JPW16147 EH1071

Bennett Marine Replacement Machine Screw 1/4-20 x 3/4'' Lower Hinge Fastener

$3.63 (inc. GST)

Bennett Marine Replacement Machine Screw 1/4-20 x 3/4'' Lower Hinge Fastener JPW16143 H1175

Bennett Marine Replacement Power Converter from 24V and 32V to 12V

$103.12 (inc. GST)

Bennett Marine Replacement Power Converter from 24V and 32V to 12V JPW16223

Bennett Marine Replacement Relay Module for Auto Tab Control Kit

From $208.68 (inc. GST)

Bennett Marine Replacement Relay Module for Auto Tab Control Kit

Bennett Marine Replacement Screw Set for Trim Tab Actuators

$6.60 (inc. GST)

Bennett Marine Replacement Screw Set for Trim Tab Actuators JPW16149

Bennett Marine Rocker Switch for BOLT Electric Trim Tab Systems

$241.18 (inc. GST)

Bennett Marine Rocker Switch for BOLT Electric Trim Tab Systems JPW16320 BRC4000

Bennett Marine VP1159 Valve Seat and O-Ring

$12.71 (inc. GST)

Bennett Marine VP1159 Valve Seat and O-Ring JPW16236 VP1159

Bennett Marine BOLT Electric Edge Mount Trim Tabs Limited Space 12 Inch Plate

From $1,274.68 (inc. GST)

Bennett Marine BOLT Electric Edge Mount Trim Tabs Limited Space 12 Inch Plate

Bennett Marine BOLT Short Electric Actuator with Adjustable Upper Hinge 290mm

$615.19 (inc. GST)

Bennett Marine BOLT Short Electric Actuator with Adjustable Upper Hinge 290mm JPW16335 SEA3000

Bennett Marine Spare Parts Guide for Hydraulic Trim Tab Systems

From $0.01 (inc. GST)

Bennett Marine Spare Parts Guide for Hydraulic Trim Tab Systems

Bennett Marine Actuator Piston O-Ring for Hydraulic Trim Tab System

$10.55 (inc. GST)

Bennett Marine Actuator Piston O-Ring for Hydraulic Trim Tab System JPW16192 A1121

Bennett Marine Actuator Upper Hinge O-Ring for Hydraulic Trim Tab System

$10.55 (inc. GST)

Bennett Marine Actuator Upper Hinge O-Ring for Hydraulic Trim Tab System JPW16191 A1120

Bennett Marine BOLT Electric Trim Tabs 4 Inch Plate

From $1,194.97 (inc. GST)

Bennett Marine BOLT Electric Trim Tabs 4 Inch Plate

Bennett Marine BOLT Standard Electric Actuator with Fixed Upper Hinge 350mm

$621.03 (inc. GST)

Bennett Marine BOLT Standard Electric Actuator with Fixed Upper Hinge 350mm JPW16332 BEA2000

Bennett Marine Control Box Indicator for BOLT systems

$733.70 (inc. GST)

Bennett Marine Control Box Indicator for BOLT systems JPW16342 BCI8500

Bennett Marine EIC Control Kits for Single Stations

From $954.57 (inc. GST)

Bennett Marine EIC Control Kits for Single Stations

Bennett Marine EIC Relay Module for Hydraulic Trim Tab System

From $525.02 (inc. GST)

Bennett Marine EIC Relay Module for Hydraulic Trim Tab System

Bennett Marine EIC Upper Hinge with Sensor Wire

From $121.75 (inc. GST)

Bennett Marine EIC Upper Hinge with Sensor Wire

Bennett Marine EIC Wiring Harness for Hydraulic Trim Tab System

From $280.03 (inc. GST)

Bennett Marine EIC Wiring Harness for Hydraulic Trim Tab System

Bennett Marine Hardware Packs for EIC Single and Dual Stations

From $46.41 (inc. GST)

Bennett Marine Hardware Packs for EIC Single and Dual Stations

Bennett Marine Hydraulic Tubing for Hydraulic Trim Tab System

From $9.68 (inc. GST)

Bennett Marine Hydraulic Tubing for Hydraulic Trim Tab System

Bennett Marine Installation Hardware for Classic Hydraulic Trim Tabs

From $96.55 (inc. GST)

Bennett Marine Installation Hardware for Classic Hydraulic Trim Tabs

Bennett Marine Replacement 1/8 Inch Pipe to 1/4 Inch Tube Connector

$14.29 (inc. GST)

Bennett Marine Replacement 1/8 Inch Pipe to 1/4 Inch Tube Connector JPW16125 VP1141

Bennett Marine Replacement Brass Line T Fitting

$26.40 (inc. GST)

Bennett Marine Replacement Brass Line T Fitting JPW16128 T1126

Bennett Marine Replacement EIC Display Keypad Control

$459.43 (inc. GST)

Bennett Marine Replacement EIC Display Keypad Control JPW16249 EIC001

Bennett Marine Replacement EIC Lower Display Cable 4ft

$153.99 (inc. GST)

Bennett Marine Replacement EIC Lower Display Cable 4ft JPW16257 EIC301

Bennett Marine Replacement EIC Sensor Wire Pigtail Pack

$43.75 (inc. GST)

Bennett Marine Replacement EIC Sensor Wire Pigtail Pack JPW16258 EIC401

Bennett Marine Replacement Face Plate for Trim Tab Hydraulic Pump Unit

$18.91 (inc. GST)

Bennett Marine Replacement Face Plate for Trim Tab Hydraulic Pump Unit JPW16164 VP1144

Bennett Marine Replacement Female Elbow Brass

$26.83 (inc. GST)

Bennett Marine Replacement Female Elbow Brass JPW16131 H1172

Bennett Marine Replacement Filler Plug for Hydraulic Power Unit

$10.39 (inc. GST)

Bennett Marine Replacement Filler Plug for Hydraulic Power Unit JPW16117 VP1140

Bennett Marine Replacement Fluid Reservoir for Trim Tab System

$59.07 (inc. GST)

Bennett Marine Replacement Fluid Reservoir for Trim Tab System JPW16115 VP1139

Your Cart

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern JPW Marine’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘JPW Marine’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 64 Division Street Welshpool, WA 6106. Our ABN is 71 650 739 521. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

JPW Marine is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.

We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.

A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at https://www.oaic.gov.au/

What is Personal Information and why do we collect it?
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone numbers, facsimile numbers and trade references.

This Personal Information is obtained in many ways including:

product orders placed with us
applications for a wholesale customer account with us
applications for jobs we advertise
job interviews
applications to become a supplier of ours
when we engage a new supplier
correspondence between us and individuals via telephone, email, facsimile, social media and live chat over the internet
form submissions on our website www.jpwmarine.com.au
from your website or publicly-available social media presence (if you have one)
from media and publications
from other publicly available sources
from cookies, and
from third parties

We don’t guarantee website links or policy of authorised third parties.

We collect your Personal Information for:

the primary purpose of delivering products that you have ordered
providing information to our customers, and
marketing to both existing and prospective customers

We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure.

You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing:

via email at sales@jpwmarine.com.au
via post at PO Box 261 Welshpool WA 6986

When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.

Job applicants and employees

In additional to the purposes listed above, we collect additional Personal Information from job applicants and employees in order to:

determine their right to work in Australia
assess their suitability for an advertised role within JPW Marine
pay employee salaries, superannuation and leave
withhold PAYG tax & pay it to the ATO

This additional information may include employment details, bank account details, superannuation fund details, tax file number, work visa status (if applicable) signature, date of birth and employer references.

This information is either held on secure servers in digital format, or in a locked cabinet if hard copy format. Job applicant information in hard copy format is destroyed within 3 months after the position has been filled, however if it is in digital format it may be retained for a period of up to one year. Employee information may be kept for up to one year after an employee ceases employment with JPW Marine, after which it will be deleted/destroyed.

Third Parties
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.

Disclosure of Personal Information
Your Personal Information may be disclosed in a number of circumstances including the following:

Third parties where you consent to the use or disclosure (such as to transport carriers we use to deliver your orders; and
Where required or authorised by law

JPW does not disclose personal information to overseas recipients except in the case where we are asked to deliver an order to an overseas address. In that scenario only personal information required for the transport carrier to undertake the following would be disclosed:

a) To deliver the order, or
b) in the scenario that the order could not be delivered for whatever reason, to contact the recipient in order to re-attempt delivery
c) in the scenario that the recipient claimed the order had not been received, to undertake an investigation into what happened to the package/s

Security of Personal Information
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is stored in client files which will be kept by us for a minimum of 7 years.

Access to your Personal Information
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing:

via email at sales@jpwmarine.com.au
via post at PO Box 261 Welshpool WA 6986

JPW Marine will not charge any fee for your access request but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.

Maintaining the Quality of your Personal Information
It is an important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.

Policy Updates
This Policy may change from time to time and is available on our website.

Privacy Policy Complaints and Enquiries
If you have any queries or complaints about our Privacy Policy, or how your Personal Information is/has been handled by JPW Marine or a supplier of ours, please contact us at:

JPW Marine

PO Box 261, Welshpool WA 6986
sales@jpwmarine.com.au
+61 (0)8 6253 3000